Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window replacement near me frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap between the window and the door is significant, you may want to use security screens that includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of issues like sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and check for upvc window repairs an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The corners of the sash must be aligned with the casing joint. If it doesn't, UPVC Window Repairs you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on how serious the problem is, the old caulking may need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it blows open with an ease. They can be repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to change a window hinge but it's much easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. You can check this by checking for the arrows on each hinge, this shows which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. This can often be resolved by sending us a photograph on our website. We will be pleased to offer you advice.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges, also because of wear and tear, may become displaced, which will cause a gap to form where the sash meets the frame. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it is possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through these gaps. Installing high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as possible.