Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers to help the new pane to fit properly into the window frame.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

upvc window repair near me is a durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws until they remain in position.

If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to take action if wake up every morning to discover mouldy walls and wet floors. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repair windows are difficult to open, or loose and open in a breeze It could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It's easy to change a window hinge, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us photos through our website can often solve the issue. We are more than happy to give suggestions.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your Upvc window repair window.

5. Draughts

Draughts can be caused by different causes. The hinges, also due to wear and tear could become misaligned. This will cause an opening to appear where the sash meets the frame. They can be repaired by giving them good cleaning, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The interlock may be misaligned. This is located on the hinge side and might require to be cleaned. In some instances it might be necessary to replace these.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes filled with some type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it is cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.