Fiat 500 Key Fob Replacement

If your 500 key fob fails to function, try using another one to see if the car can detect it. If it does, then the issue is most likely due to the original fob's battery, or water damage.

First replace the battery. Make sure the new CR2032 coin cell battery is inserted correctly, with the "+" side facing downwards in the fob.

Dead Battery

The battery is usually the cause of the fob's inability to function. This isn't a problem to solve and most fobs give you a warning when the battery is failing. You can find the correct procedure on YouTube for almost any key fob in your car or in your owner's manual. You can also bring it to a local locksmith or the dealer who sold it to you to replace it.

Sometimes, a fob may be inoperable and there could be an issue with the circuit board inside. It is rare however, it can happen. The internal chip can be damaged in the event you drop the fob onto something that is hard. It could also happen if you use an aftermarket fob, and the key doesn't work. In this scenario it is required to visit a dealer or locksmith to have the key reset to work with your 500.

One 2012 fiat car keys cut fiat 500 spare key 500 flip key remote – Looks like Ilco with locks, unlocks and trunk buttons - new keyless entry replacement (will require cutting and program by locksmith).

Chip Damaged

Fiat 500 key fobs are wireless devices that transmit a signal to the car every time you press the button. It contains a microchip with information about the code needed to connect with your car. If the chip is damaged it will not transmit the correct code, and the car won't start. It's possible to repair this type of damage and a locksmith can assist. United Locksmith can complete this service on both classic as well as modern models, so don't hesitate to call.

You can buy a new fob and have it professionally programmed by a locksmith. It is cheaper to do this instead of going to the dealer, and it works just as well. A locksmith will require specific details from you, such as the year that your car was manufactured and the model's name.

Rub the chip with an old dollar bill if you're not certain of what to do. The copper in the bill is abrasive, and will get rid of dirt and oxidation. However, it will not harm the microchip. If the chip is physically damaged, it might not be able to be repaired. This can happen when you drop it or get it pushed over by your vehicle.

Water Damage

Water damage is likely to happen on your fob, no matter if you dropped them in the pool accidentally or put them in a pocket while swimming, or splashed water on them in a rainy afternoon. Even if there's only a small amount of water on its keys, this could cause serious problems for its electronics and stop it from working effectively.

It is possible to solve this issue yourself by removing the fob and cleaning it using a paper towel. Once the fob has dried you can then replace the battery and it will start working normally.

You can also take it to an auto repair shop or locksmith to get it professionally cleaned and programmed. These professionals will use special equipment to ensure that the key fob is compatible with the car's computers.

When the key fob on your Fiat 500 stops working, you may be frustrated and overwhelmed. It is tempting to visit a dealer to have your key fob replaced however, this can be expensive and difficult to arrange. Locksmiths can handle all aspect of the replacement of your car's key fob without the need for a dealership visit. For this reason, they are a superior choice than the dealership.

Pairing Issues

If you drop your keyfob, or it stops working and nothing else appears to be wrong, it may be the chip. This can be due to water damage or a dead battery. it may be due to a need to reprogramme.

This can be accomplished by following the steps in your owner's manual. If you're having issues or your manual isn't working then you should hire an automotive locksmith complete this task. This will ensure that your chip isn't damaged and is likely to be the cheapest solution.

Another issue facing 500 owners is that the key fob will not lock the car key cover fiat 500. This can be a big issue if you're driving to a gas station and want to fill up. Some owners have even reported their 500's locking mechanism breaking and having to replace the entire intermediate shaft for steering. This issue has been described in a technical support bulletin (TSB) issued by Fiat.

A reputable locksmith will assist you when your reprogram fiat 500 key fob is experiencing issues. They're able to duplicate your key or make you new keys that unlock and start your vehicle. They can do this without seeing your old key, and it's usually cheaper than buying one from a dealer.