ghost immobiliser review 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to safeguard cars from hacking or key cloning, is a discreet device which can be installed without damaging your vehicle. It prevents your vehicle from starting until you press the correct sequence of buttons within your vehicle similar to the password of the phone.

Stop/Start

Ghost Immobilisers protect vehicles from being stolen by blocking the engine from starting until it is issued the correct PIN code. This is done with no modifications to the vehicle, and is completely undetectable to thieves. The unit is directly connected to the ECU through the CAN databus to immobilise the vehicle. This is the same system the ones used by car manufacturers for years. However, thieves are unable to escape it using a new key or key relay technology, as they could with factory-installed systems.

Ghost is compatible with any vehicle with an engine, which includes cars, vans, motorhomes, caravans, and bikes. The same system is also compatible with electric cars. It is an excellent alternative to steering wheel locks and wheel clamps and can be installed with a minimum of effort.

When the Ghost is activated, it will block all buttons in your car and stop the ignition from being started unless a PIN code has been entered first. This can be done via the Android or Apple mobile apps or by entering the code through your key fob. If the incorrect code is entered, the app will display an indicator light. The Ghost will then not allow the vehicle to start again. This is a great way to deter thieves. If the vehicle can't be started, they will move on.

The Ghost is tiny, weatherproof device that can be concealed in the most difficult to reach areas of your car. It is incredibly easy to install, taking an average of 20-30 minutes for each vehicle. It is also very easy to remove should you decide to switch your vehicle or hand it in for valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system, and is recognized by a few insurance companies. It also has an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode that can be activated by pressing a button within the app, or by using your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which are able to be removed, ghost immobilisers are hidden and integrated into the vehicle. They are nearly impossible to hack or bypass and, even if they are discovered, thieves will not be able to start the engine. This is because a ghost immobiliser prevents key hacking, signal jamming and device spoofing - methods that are commonly used by thieves to gain entry into vehicles with standard immobilisers.

The immobiliser sends a code to the ECU. If the incorrect code is received and the vehicle does not start since the engine won't start. It is possible to disable a ghost immobiliser with an application program, but it's extremely time-consuming and difficult to do so. The software must be installed and operated by a authorised installer.

The Ghost immobiliser is a tiny device that is part of the wiring loom of your vehicle and is not visible to the naked eye after it has been installed. It is not visible on diagnostic systems, there are no LED indicators, and it does not connect to the engine through the OBD port. It communicates in silence through the CAN data loop.

The system won't allow the vehicle to start until it is given an input PIN code defined by the user. The code is entered by pressing buttons on the steering wheels or door panels, or the centre console. This is a safer method of protecting your vehicle as it does not require the use of a key fob or remote control.

In addition to this Ghost offers a service mode which can be activated using the application on your mobile phone. This will allow you to give your keys to someone else for valet parking or servicing without entering the disarm sequence.

You should never remove the system from your Ghost by yourself, no matter whether it is in service mode. This can damage the engine. It is recommended to contact an TASSA verified installer who can remove the system safely and correctly. Our newest GHOST immobilisers have a specific fingerprint QR sticker hidden in different parts of your vehicle. They are connected to our security register. If the system is removed and then is sold on the blackmarket, this will allow you to trace the owner of the system.

Anti-Hijack

The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This system works like smart keys and is one of the most secure methods to keep your car safe from theft. The Ghost system will automatically turn on the hazard light and stall the car's engine when the ignition is on and the vehicle is stationary. This gives the driver and passengers time to press the hidden security button before the system is activated.

Unlike many competitor systems that simply stop the engine when the ignition is switched on, the ghost immobiliser problems system is based on a specific controller and timer that will shut off the valve for cutting off fuel 14 when it is activated after an agreed-upon time even when the ignition is in operation! This delay time period must be long enough to allow the hijacked owner of the vehicle to drive away from the location of the robbery and sufficient distance from the vehicle in which it is stuck before the system can reactivate.

The Ghost has an additional layer of security to prevent common hacking methods used to gain entry to modern cars, such as relay attacks and key range extending. This is because the ghost immobiliser near me immobilise - top article - system communicates in a quiet manner and doesn't emit any signals that could be picked up by a criminal using code grabbing or RF scanning technology.

The autowatch ghost immobiliser cost system also comes with a Service / Valet mode that allows your vehicle to be temporarily re-started and driven without the need for a PIN code. This is great if you park your car and only require it to be left for a short time for a few minutes, like to open the garage door or place groceries in the boot. The system will then exit the service mode based on speed and time, or via the simple input of a PIN code process. This will give you complete security that only YOU are able to drive your vehicle!

Keyless Entry

Many consumers are now seeking additional security measures because of the growing trend of contactless car theft. This is particularly true for those who have put in time or money to personalize their vehicle or own expensive vehicles. An add-on immobiliser can be an effective way to avoid this type of theft as it will stop your vehicle from starting until the correct pin code is entered on your key fob.

Immobilisers are made to work with various vehicle circuits, including those that control starter motors and fuel pumps. They can also shut off the car alarm to draw attention and ward off potential thieves.

These devices are directly connected to the engine control unit using the CAN data network. They hinder thieves from gaining access to it by installing a new ECU or by using key programmers. These immobilisers are installed discretely and do not leave any marks in your vehicle. They are also unnoticeable with the latest tools of thieves.

As opposed to other systems that require a specific application, or a tag that is worn on the driver's person and a ghost immobilise immobiliser can only be deactivated by pressing a sequence of electronic buttons that are already present on your steering wheel, door panel and centre console, allowing you to choose a custom pin sequence. The pin can be changed as often as you like, meaning it is as secure as a credit card, and can be even more difficult to crack because it requires up to 20 press.

Ghost also has the option of a valet/service mode that lets you deactivate the system if your vehicle is going to be handed over for valet parking or for service which allows it to operate within set parameters, like a 30mph speed limit, so you don't have to worry about your car being driven in reckless manner. It can then be reactivated with the original key or the corresponding entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser on the market, and is insurance approved by Thatcham as an accessory for your car when installed by one of our authorised installers. The Ghost 2 immobiliser comes with six QR fingerprint labels, as well as an ISR contact cards containing the unique QR codes as well as an emergency code that is secure. They are all stored in your wallet or purse.