UPVC Window Handle Replacement

It's simple to repair a broken window handle with the proper tools. It is important to identify the kind of handle you have and its spindle size before purchasing the replacement.

Older uPVC windows replacement near me feature cockspur window handles which have spurs that protrude to secure a wedge-shaped cockspur striker plate. They can be left- or right-handed, and must be matched when replacing.

What type of lock and handle do I have?

There are a myriad of windows locks and handles made of upvc each with its particular advantages and uses. The type of handle that you own will determine if your locking mechanism is effective and also if it is simple to open windows. Over time, and with regular use the upvc handles that are on your windows could become damaged and worn out. This makes them less secure and effective. In some instances they might even be completely removed. If you notice that your upvc window handles have been removed, it's essential to fix them as soon as possible. This will stop possible burglaries, and keep your house safe.

It's an easy task that anyone can complete. You'll require a few tools, but with proper knowledge, it's an easy task that will only take a few minutes. You will need to be aware of the type of lock or handle you have on your window. This will help you choose the correct replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They have a flat design and come with an opening that is connected to the locking mechanism of the frame of the window when it is turned. Inline upvc handles also come with a spindle that goes through the center of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles are held to the frame of the window with a single screw and are less secure than other varieties of window handle.

Tilt and Turn Handles

In contrast to other upvc handles the tilt and turn handles can be rotated to open the window and tilted inwards to allow ventilation. They feature a 7mm spindle on the back and are available both in right and left-handed versions.

When you are purchasing replacement sash windows cost handles for upvc, it is important to measure the spindle's length since not all of them are the same size. Drop something in the middle of the hole to test the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles operate in a similar way like doors, turning the handle to operate an opening inside the frame. The latch opens the window, so that it can be shut and opened. But, at times, these handles can become damaged, especially if they are regularly used or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they are not operating correctly.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. This is why it is crucial to know the type of handle you have installed on your uPVC window to find the right replacement for it.

You can determine the type of uPVC handle you are using by looking at the base section of the handle. A snap-in cover should be over the screw that holds the handle's base in place. When you remove this cover you will be able to see the second screw that holds the base of the handle in position. Once both screws are removed you should be able to pull the handle away from the uPVC window.

Once you have removed the uPVC window replacement near me handle, you have to carefully remove the spindle you have removed from the locking mechanism. Take careful note of the length of the spindle since you'll need to ensure that you purchase an alternative that is the same length as the original handle and locking mechanism.

The main issue with most window handles made of uPVC is that the spindle becomes worn out and can no longer work with the locking mechanism. This could be due wear and tear from continuous use or a loosening of the locking mechanism, or even rust over time. If this occurs, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Window handles can become damaged or even broken over the course of time. It is crucial to fix them as soon as possible to ensure your safety. It is easy to replace a damaged or worn handle. The task can be accomplished in under a minute without the need of special tools.

To take off the handle, you must first remove the screw that is located at the base of the handle. Once this is removed the handle will be pulled away from the base section. There will be a second screw that is located at the bottom of the handle's base and it is able to be removed too. Once the two screws are removed, the handle will be detached from the window's base.

After the handle has been removed, take the new handle and line up the fixing holes with the holes that are currently in the window frame. There may be a little sticker or caps on the new handle, so take them off these if necessary and then put the handle in the frame. It is important to check that the handle is working after it has been installed. Turn the handle over and make sure that the lock mechanism is activated.

Espag handles come with a spindle that protrudes from the handle and slot into a multipoint locking mechanism inside the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that is able to hook over either the outer frame or transom bar cross-member within the window.

Once you have installed the new handle, insert the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. The handle is now ready to use, so try opening and closing the window several times to check that it functions correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult and the process is actually very simple. All you need is a screwdriver and a little bit of patience. First, make sure the handle that you are replacing is unlocked. Then remove any visible screws. You can also replace them using screw caps. After removing the handle you'll need to take note of the length of spindle that extends from the back. This is crucial as it will determine the type of handle that you will require to purchase.

Espagnolette handles made of uPVC are the most sought-after type of handle. They have a spindle that runs through the handle and acts as a locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. In regular use and over time, espagnolette handles may be damaged.

Cadenza handles are a different kind of uPVC window handle that is commonly used on tilt and turn windows. They have an extended blade that works a multipoint locking mechanism within the window. They are more secure than an espagnolette handles since they only open from the inside. They can be replaced with the same procedure as espagnolette handles, however you should ensure that the new handle has a curved blade, as opposed to flat ones.

Once you have decided on the right handle for you then you can align the new handle to the existing screw holes and then screw it into place. Then, put the screws back on and verify that your new handle is operating properly. This is done by shifting the handle from the locked to the unlocked position and the reverse direction a few times. It may be worth contacting an expert to see how you can fix any problems. They are often able to advise you on the best solution to solve the issue in a fast and efficient manner.