Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. However If you have double pane windows that are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this case you'll need to locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass is removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a variety of issues that include sagging. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window to access the frame. After that, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be due to the handle mechanism wearing out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and perform a test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't, Upvc repair you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the old caulking may need to be removed before a new layer can be applied. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes are free of debris in them, and also that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it blows open with a breeze. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window hinge is an easy procedure, but it is easier to do with someone else to help you hold the frame in place.

Check that the upvc window repairs hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer advice.

It is also essential to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges may also become disaligned as a result of wear, creating an opening where the sash meets frame. This can be easily repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it's possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it could be cheaper to replace them instead of fixing them. So, if you're having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.